Listen to TCP?
Listen to TCP?
The SIP client shows registered, but sipsorcery does not make a binding for it. If I set the client to use UDP, then no problem. Does the local version actually support TCP at all, or some settings I missed? Thanks as always.
Re: Listen to TCP?
The ports that the sipsorcery server will listen on are specified in the sipsorcery-appsvr.exe.config. There should be a setting for a TCP socket that is commented out. If you uncomment it and restart your instance then you should be able to connect to it over TCP.
Re: Listen to TCP?
The only line I see "tcp" in my config file is this:
Code: Select all
<sipproxy>
<sipsockets>
<socket>*:5060</socket>
<socket protocol="tcp">*:5060</socket>
</sipsockets>
</sipproxy>
Re: Listen to TCP?
It should be listening on TCP already then. Can you telnet <your ipaddress> 5060?
Re: Listen to TCP?
No, can't telnet to 5060. [correction]Yes I can telnet to 5060.
Last edited by fixup77 on Sun May 29, 2011 6:07 pm, edited 1 time in total.
Re: Listen to TCP?
Nothing else is required for sipsorcery to listen on a TCP socket apart from the setting in the configuration file. You could watch the console or log file messages when the sipsorcery starts up to try and see why it's not able to open the TCP port.
Re: Listen to TCP?
Sorry I used a wrong command for telnet (ip:5060, should be ip 5060), so telnet works.
Turned out it was the SIP client, CSipSimple. It has an option for tcp instead of udp in the menu, but this function must have not been actually implemented. Even more confusing is it says registered!
Uninstalled CSipSimple and installed SipDroid, everything is fine now. SipSorcery rocks, so do you Aaron!
A strange thing though: SipDroid won't receive income calls, no problem when using udp. No problem to make google voice calls, so no inbound issues, just the phone won't ring via TCP from sipsorcery.
Everything is fine with pbxes.org via tcp. Therefore I connect sipdroid to pbxes first and then to SS.
Now wishing you can make google voice call via gtalk...
Turned out it was the SIP client, CSipSimple. It has an option for tcp instead of udp in the menu, but this function must have not been actually implemented. Even more confusing is it says registered!
Uninstalled CSipSimple and installed SipDroid, everything is fine now. SipSorcery rocks, so do you Aaron!
A strange thing though: SipDroid won't receive income calls, no problem when using udp. No problem to make google voice calls, so no inbound issues, just the phone won't ring via TCP from sipsorcery.
Everything is fine with pbxes.org via tcp. Therefore I connect sipdroid to pbxes first and then to SS.
Now wishing you can make google voice call via gtalk...
Re: Listen to TCP?
Finally I got V1.2 working and now TCP transport works like a charm!