Softphone with MSS+Voxalot-VM+PaidCalls
TheFug,
RichardTaur and I are working on the SipSorcery Dialplans now, look in the Technical Support Forum post titled "Migration to SipSorcery".
http://www.mysipswitch.com/forum/viewforum.php?f=6
Below, look at his coding closely, how he routes his outgoing using the "case dialer_length", which is something that I had not seen here before. We basically combined your code with his for this SipSorcery dialplans.
Take Care, and thanks again dude,
MikeE
RichardTaur and I are working on the SipSorcery Dialplans now, look in the Technical Support Forum post titled "Migration to SipSorcery".
http://www.mysipswitch.com/forum/viewforum.php?f=6
Below, look at his coding closely, how he routes his outgoing using the "case dialer_length", which is something that I had not seen here before. We basically combined your code with his for this SipSorcery dialplans.
Take Care, and thanks again dude,
MikeE
Last edited by sirmikey1 on Sat Jul 18, 2009 4:09 pm, edited 2 times in total.
Thank you !
What i also noticed, is when i switch back to MSS, (when trying to get Sipsorcery to work in my VoIP device)
I have to reset my modem and VoIP device, to have good old MSS working again, this, i did not do for working with Sipsorcery, but from now on, i will do this also.
What i also noticed, is when i switch back to MSS, (when trying to get Sipsorcery to work in my VoIP device)
I have to reset my modem and VoIP device, to have good old MSS working again, this, i did not do for working with Sipsorcery, but from now on, i will do this also.
Thanks, The Fug.
gear: my ISP's Zyxel Modem/Router in bridge, Sitecom WL309 Router, Siemens Gigaset 301D
gear: my ISP's Zyxel Modem/Router in bridge, Sitecom WL309 Router, Siemens Gigaset 301D
But you are not using Fonosip for dialing this number ? because Fonosip has a speeddial for it ..... 411, no need to dial 1800GOOG411
When using Sipsorcery everything registers, but i get dialpan error, copied your in and out dialplans,
Only incoming works sometimes.....
When using Sipsorcery everything registers, but i get dialpan error, copied your in and out dialplans,
Only incoming works sometimes.....
Thanks, The Fug.
gear: my ISP's Zyxel Modem/Router in bridge, Sitecom WL309 Router, Siemens Gigaset 301D
gear: my ISP's Zyxel Modem/Router in bridge, Sitecom WL309 Router, Siemens Gigaset 301D
TheFug,
I am trying to use the sipsorcery sip for in & out, and this is why I programmed google 411 in the dialplan dialed through sipbroker.
Thank You Again,
Mike
I am trying to use the sipsorcery sip for in & out, and this is why I programmed google 411 in the dialplan dialed through sipbroker.
Thank You Again,
Mike
Last edited by sirmikey1 on Sat Jul 18, 2009 4:09 pm, edited 1 time in total.
For this reason i have also a GXP2000 (IP-phone) on my network,
i have a modem, (only one LAN port) switched in modem only mode, connected to my DECT IP base station (has build in router) (it's WAN to the modem, and it's LAN port to a switch, on this switch i have a WiFi AP, and a cable to the second switch, which connects to my pc an IP phone)
sofar i guess my DECT IP router, routes things good, and i start throwing ports open when needed.
I have bad experiences with ATA's and Fritz!boxes, then i switched to the C450IP (siemens) which was a big improvement for me, now i use the 301 D,
also Siemens, its a DECT IP base station, which can manage 6 SIP provider accounts, and also 6 handsets, it's very rare to have one device, that is good in all functions, and the DC 227 is a great ADSL2+ modem from Sitecom.
(the GXP2000 has room for 4 sip accounts)
i have a modem, (only one LAN port) switched in modem only mode, connected to my DECT IP base station (has build in router) (it's WAN to the modem, and it's LAN port to a switch, on this switch i have a WiFi AP, and a cable to the second switch, which connects to my pc an IP phone)
sofar i guess my DECT IP router, routes things good, and i start throwing ports open when needed.
I have bad experiences with ATA's and Fritz!boxes, then i switched to the C450IP (siemens) which was a big improvement for me, now i use the 301 D,
also Siemens, its a DECT IP base station, which can manage 6 SIP provider accounts, and also 6 handsets, it's very rare to have one device, that is good in all functions, and the DC 227 is a great ADSL2+ modem from Sitecom.
(the GXP2000 has room for 4 sip accounts)
Thanks, The Fug.
gear: my ISP's Zyxel Modem/Router in bridge, Sitecom WL309 Router, Siemens Gigaset 301D
gear: my ISP's Zyxel Modem/Router in bridge, Sitecom WL309 Router, Siemens Gigaset 301D