sipsorcery still off line?

Latest news about SIP Sorcery
rgormley
Posts: 2
Joined: Sun Feb 05, 2012 2:43 am

sipsorcery still off line?

Postby rgormley » Mon Apr 09, 2012 6:12 am

i`m using the temp DNS settings 69.59.142.213 that gets me registered but all calls just get an engaged signal.

any ideas? or just wait a few hours for it it settle down?

User avatar
Aaron
Site Admin
Posts: 4546
Joined: Thu Jul 12, 2007 12:13 am

Re: sipsorcery still off line?

Postby Aaron » Mon Apr 09, 2012 10:27 am

The only thing that was messed up was DNS so if the calls can get to the sipsorcery server at 69.59.142.213 then they will work. Other than that the DNS change has been in place now for over 30 hours so it should be cleared up for most people and for those it hasn't the maximum time a DNS change typically takes to propagate across the internet is 48 hours.

rgormley
Posts: 2
Joined: Sun Feb 05, 2012 2:43 am

Re: sipsorcery still off line?

Postby rgormley » Mon Apr 09, 2012 11:00 am

Does this help to see where my issue is?


Monitor 10:54:38:651: basetype=console, ipaddress=*, user=931569, event=*, request=*, serveripaddress=*, server=*, regex=.*.
DialPlan 10:54:40:042 sip1(11116): New call from udp:58.96.67.33:5060 successfully authenticated by digest.
DialPlan 10:54:40:057 sip1(11116): Using dialplan gotalk for Out call to sip:96169357@sipsorcery.com:5060.
NewCall 10:54:40:057 sip1(11116): Executing script dial plan for call to 96169357.
DialPlan 10:54:40:104 sip1(11116): SimpleWizard processing commenced.
DialPlan 10:54:40:151 sip1(11116): SimpleWizard matched on rule "local numbers to gotalk" with [23456789], command Dial, ${EXTEN}@gotalk.
DialPlan 10:54:40:151 sip1(11116): Commencing Dial with: ${EXTEN}@gotalk.
DialPlan 10:54:40:151 sip1(11116): Attempting to locate a provider for call leg: sip:96169357@gotalk.
DialPlan 10:54:40:151 sip1(11116): ForkCall commencing call leg to sip:96169357@sip.gotalk.com.
DialPlan 10:54:40:151 sip1(11116): SIPClientUserAgent Call using alternate outbound proxy of udp:69.59.142.213:5060.
DialPlan 10:54:40:151 sip1(11116): Switching to sip:96169357@sip.gotalk.com:5060 via udp:69.59.142.213:5060.
DialPlan 10:54:40:151 sip1(11116): SDP on UAC call had public IP not mangled, RTP socket 58.96.67.33:53456.
DialPlan 10:54:40:963 sip1(11116): Information response 100 Trying for sip:96169357@sip.gotalk.com.
DialPlan 10:54:40:979 sip1(11116): Response 400 Bad Request for sip:96169357@sip.gotalk.com.
DialPlan 10:54:40:979 sip1(11116): SimpleWizard matched on rule "normal melbourne numbers" with 9, command Dial, ${EXTEN}@gotalk.
DialPlan 10:54:40:979 sip1(11116): Commencing Dial with: ${EXTEN}@gotalk.
DialPlan 10:54:40:979 sip1(11116): Attempting to locate a provider for call leg: sip:96169357@gotalk.
DialPlan 10:54:40:979 sip1(11116): ForkCall commencing call leg to sip:96169357@sip.gotalk.com.
DialPlan 10:54:40:979 sip1(11116): SIPClientUserAgent Call using alternate outbound proxy of udp:69.59.142.213:5060.
DialPlan 10:54:40:979 sip1(11116): Switching to sip:96169357@sip.gotalk.com:5060 via udp:69.59.142.213:5060.
DialPlan 10:54:40:979 sip1(11116): SDP on UAC call had public IP not mangled, RTP socket 58.96.67.33:53456.
DialPlan 10:54:41:151 sip1(11116): Information response 100 Trying for sip:96169357@sip.gotalk.com.
DialPlan 10:54:41:182 sip1(11116): Response 400 Bad Request for sip:96169357@sip.gotalk.com.
DialPlan 10:54:41:182 sip1(11116): Dialplan cleanup for 931569.
DialPlan 10:54:41:495 sip1(11116): Dial plan execution completed without answering and a last failure status of BadRequest Bad Request.
DialPlan 10:54:41:510 sip1(11116): UAS call failed with a response status of 400 and Bad Request.
NATKeepAlive 10:54:48:229 sip1(1936): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:58.96.67.33:5060.
NATKeepAlive 10:54:58:323 sip1(1936): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:58.96.67.33:5060.
NATKeepAlive 10:55:08:402 sip1(1936): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:58.96.67.33:5060.
NATKeepAlive 10:55:18:495 sip1(1936): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:58.96.67.33:5060.
NATKeepAlive 10:55:28:574 sip1(1936): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:58.96.67.33:5060.
DialPlan 10:55:37:918 sip1(11116): New call from udp:58.96.67.33:5060 successfully authenticated by digest.
DialPlan 10:55:37:933 sip1(11116): Using dialplan gotalk for Out call to sip:96169357@sipsorcery.com:5060.
NewCall 10:55:37:949 sip1(11116): Executing script dial plan for call to 96169357.
DialPlan 10:55:37:996 sip1(11116): SimpleWizard processing commenced.
DialPlan 10:55:38:043 sip1(11116): SimpleWizard matched on rule "local numbers to gotalk" with [23456789], command Dial, ${EXTEN}@gotalk.
DialPlan 10:55:38:043 sip1(11116): Commencing Dial with: ${EXTEN}@gotalk.
DialPlan 10:55:38:043 sip1(11116): Attempting to locate a provider for call leg: sip:96169357@gotalk.
DialPlan 10:55:38:043 sip1(11116): ForkCall commencing call leg to sip:96169357@sip.gotalk.com.
DialPlan 10:55:38:043 sip1(11116): SIPClientUserAgent Call using alternate outbound proxy of udp:69.59.142.213:5060.
DialPlan 10:55:38:043 sip1(11116): Switching to sip:96169357@sip.gotalk.com:5060 via udp:69.59.142.213:5060.
DialPlan 10:55:38:043 sip1(11116): SDP on UAC call had public IP not mangled, RTP socket 58.96.67.33:53456.
DialPlan 10:55:38:215 sip1(11116): Information response 100 Trying for sip:96169357@sip.gotalk.com.
DialPlan 10:55:38:246 sip1(11116): Response 400 Bad Request for sip:96169357@sip.gotalk.com.
DialPlan 10:55:38:246 sip1(11116): SimpleWizard matched on rule "normal melbourne numbers" with 9, command Dial, ${EXTEN}@gotalk.
DialPlan 10:55:38:246 sip1(11116): Commencing Dial with: ${EXTEN}@gotalk.
DialPlan 10:55:38:246 sip1(11116): Attempting to locate a provider for call leg: sip:96169357@gotalk.
DialPlan 10:55:38:246 sip1(11116): ForkCall commencing call leg to sip:96169357@sip.gotalk.com.
DialPlan 10:55:38:246 sip1(11116): SIPClientUserAgent Call using alternate outbound proxy of udp:69.59.142.213:5060.
DialPlan 10:55:38:246 sip1(11116): Switching to sip:96169357@sip.gotalk.com:5060 via udp:69.59.142.213:5060.
DialPlan 10:55:38:246 sip1(11116): SDP on UAC call had public IP not mangled, RTP socket 58.96.67.33:53456.
DialPlan 10:55:38:418 sip1(11116): Information response 100 Trying for sip:96169357@sip.gotalk.com.
DialPlan 10:55:38:449 sip1(11116): Response 400 Bad Request for sip:96169357@sip.gotalk.com.
DialPlan 10:55:38:449 sip1(11116): Dialplan cleanup for 931569.
NATKeepAlive 10:55:38:652 sip1(1936): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:58.96.67.33:5060.
DialPlan 10:55:38:668 sip1(11116): Dial plan execution completed without answering and a last failure status of BadRequest Bad Request.
DialPlan 10:55:38:668 sip1(11116): UAS call failed with a response status of 400 and Bad Request.
NATKeepAlive 10:55:48:746 sip1(1936): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:58.96.67.33:5060.
NATKeepAlive 10:55:58:824 sip1(1936): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:58.96.67.33:5060.
NATKeepAlive 10:56:08:903 sip1(1936): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:58.96.67.33:5060.
NATKeepAlive 10:56:18:997 sip1(1936): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:58.96.67.33:5060.
NATKeepAlive 10:56:29:075 sip1(1936): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:58.96.67.33:5060.

User avatar
Aaron
Site Admin
Posts: 4546
Joined: Thu Jul 12, 2007 12:13 am

Re: sipsorcery still off line?

Postby Aaron » Tue Apr 10, 2012 11:21 am

The problem is your gotalk provider does not seem to like the SIP requests from the sipsorcery end all of a sudden.

Code: Select all

Response 400 Bad Request for sip:96169357@sip.gotalk.com.


It would seem probable that the issue is related somehow to the recent DNS changes at sipsorcery but the only reason I could think of why is if gotalk rely on an active registration and for some reason your sipsorcery provider entry isn't registering. Try checking it and make sure gotalk is showing up in your list of registered provider bindings.


Return to “News”

Who is online

Users browsing this forum: No registered users and 1 guest