Outbound Caller ID
Outbound Caller ID
Hi, i'm a newbee here, just got it all working, it's great !
now my request : with my SPA3102, when i put my phone number in de UserID box, and i have also registered my phonenumber with that provider,
my CID will also be visible at the receiving "party" now, with MySIPSwitch, i need to fill in my (MySIPSwitch) username, otherwise there will be no valid switch connection, some of the people i call won't answer the phone, if they don't see a CID....
I hope this will be possible, in the near future.
Thanks, TheFug
now my request : with my SPA3102, when i put my phone number in de UserID box, and i have also registered my phonenumber with that provider,
my CID will also be visible at the receiving "party" now, with MySIPSwitch, i need to fill in my (MySIPSwitch) username, otherwise there will be no valid switch connection, some of the people i call won't answer the phone, if they don't see a CID....
I hope this will be possible, in the near future.
Thanks, TheFug
Hi TheFug,
You can specify the full From header in your dial plan:
exten => _X.,1,Switch(authuserid,pass,${dst}@sip.blueface.ie, "Joe Bloggs" <sip:sipuserid@blueface>, 194.213.29.100:5060)
The From header is typically where the callerid will be taken from by your provider on a SIP call IF you are allowed to set it.
A bit more info can be found on this thread:
http://www.mysipswitch.com/forum/viewtopic.php?t=99
Hth,
Aaron
You can specify the full From header in your dial plan:
exten => _X.,1,Switch(authuserid,pass,${dst}@sip.blueface.ie, "Joe Bloggs" <sip:sipuserid@blueface>, 194.213.29.100:5060)
The From header is typically where the callerid will be taken from by your provider on a SIP call IF you are allowed to set it.
A bit more info can be found on this thread:
http://www.mysipswitch.com/forum/viewtopic.php?t=99
Hth,
Aaron
I still don't see where i should fit in my +3123xxxxxxx or 003123xxxxxxxAaron wrote:Hi TheFug,
You can specify the full From header in your dial plan:
exten => _X.,1,Switch(authuserid,pass,${dst}@sip.blueface.ie, "Joe Bloggs" <sip:sipuserid@blueface>, 194.213.29.100:5060)
The From header is typically where the callerid will be taken from by your provider on a SIP call IF you are allowed to set it.
A bit more info can be found on this thread:
http://www.mysipswitch.com/forum/viewtopic.php?t=99
Hth,
Aaron
It now looks like:
exten =>_*7X.,1,Switch(Username,password,${EXTEN:2}@sip.VoipCheap.com)
Thanks, The Fug.
gear: my ISP's Zyxel Modem/Router in bridge, Sitecom WL309 Router, Siemens Gigaset 301D
gear: my ISP's Zyxel Modem/Router in bridge, Sitecom WL309 Router, Siemens Gigaset 301D
Try:
exten =>_*7X.,1,Switch(Username,password,${EXTEN:2}@sip.VoipCheap.com, 03123xxxxxxx <sip:Username@sip.VoipCheap.com>)
Regards,
Aaron
exten =>_*7X.,1,Switch(Username,password,${EXTEN:2}@sip.VoipCheap.com, 03123xxxxxxx <sip:Username@sip.VoipCheap.com>)
Regards,
Aaron
Didn't work for me, even with the 003123 (extra zero, slip of the pen)Aaron wrote:Try:
exten =>_*7X.,1,Switch(Username,password,${EXTEN:2}@sip.VoipCheap.com, 03123xxxxxxx <sip:Username@sip.VoipCheap.com>)
Regards,
Aaron
tried also + instead of 00
I guess nobody other has succeeded in this too ? so it's a no go for the moment, ill try some other variations, if it works i let you know...
thanks for the help sofar.
btw are there any other serviceses where it works complete with outbound CID ? or does it generally not work anywhere else ?
Thanks, The Fug.
gear: my ISP's Zyxel Modem/Router in bridge, Sitecom WL309 Router, Siemens Gigaset 301D
gear: my ISP's Zyxel Modem/Router in bridge, Sitecom WL309 Router, Siemens Gigaset 301D
Btw. the IP adress, who's ip must that be, mine, or the SIP provider's IP address ?Aaron wrote:Hi TheFug,
You can specify the full From header in your dial plan:
exten => _X.,1,Switch(authuserid,pass,${dst}@sip.blueface.ie, "Joe Bloggs" <sip:sipuserid@blueface>, 194.213.29.100:5060)
The From header is typically where the callerid will be taken from by your provider on a SIP call IF you are allowed to set it.
A bit more info can be found on this thread:
http://www.mysipswitch.com/forum/viewtopic.php?t=99
Hth,
Aaron
Thanks, The Fug.
gear: my ISP's Zyxel Modem/Router in bridge, Sitecom WL309 Router, Siemens Gigaset 301D
gear: my ISP's Zyxel Modem/Router in bridge, Sitecom WL309 Router, Siemens Gigaset 301D
I've got it working ! (the AuthID post)TheFug wrote:Btw. the IP adress, who's ip must that be, mine, or the SIP provider's IP address ?Aaron wrote:Hi TheFug,
You can specify the full From header in your dial plan:
exten => _X.,1,Switch(authuserid,pass,${dst}@sip.blueface.ie, "Joe Bloggs" <sip:sipuserid@blueface>, 194.213.29.100:5060)
The From header is typically where the callerid will be taken from by your provider on a SIP call IF you are allowed to set it.
A bit more info can be found on this thread:
http://www.mysipswitch.com/forum/viewtopic.php?t=99
Hth,
Aaron
i found it here, the last posting there descibes it:
http://www.mysipswitch.com/forum/viewtopic.php?t=16
further i guess you're geographical bound, because ...it works for Voipbuster, for me, but not with VoipCheap, Voipbuster is Dutch/German based and VoipCheap US based, i guess if i phoned normal by landline to the US, they woudn't see my CID also and visa versa....
Thanks, The Fug.
gear: my ISP's Zyxel Modem/Router in bridge, Sitecom WL309 Router, Siemens Gigaset 301D
gear: my ISP's Zyxel Modem/Router in bridge, Sitecom WL309 Router, Siemens Gigaset 301D