Hi all
I just only begin to use SS for sip routing and found out one great difficult for one provider. It requires not usual settings. I looked up about this on my local forums and found some recomendations for TrixBox settings which are work. Look at them below:
In sip_custom.conf you have to allow tcp:
Code: tcpenable=yes
Put settings via freepbx:
Trunks->Add Trunk->Add SIP Trunk
Trunk Name:
Code:multifon.ru
PEER Details:
Code:
type=friend;
host=sbc.megafon.ru
host=193.201.229.35
username=7926XXXXXXX
secret=Password
insecure=very
fromdomain=multifon.ru
fromuser=7926XXXXXXX
disallow=all
allow=g729&ulaw
qualify=yes
transport=tcp
nat=never
dtmfmode=inband
Register String:
Code:
tcp://7926XXXXXXX@multifon.ru:Password:7926XXXXXXX@sbc.megafon.ru/7926XXXXXXX
So, how could I realize thease by SIPSorcery Provider's fields?
Now I made the following setting:
Provider name:Multifon
Username:7926xxxxxxx
Password:xxxx
Server:sip:sbc.megafon.ru
Register:yes
Register contact:sip7926xxxxxxx@multifon.ru
Outbound proxy:sbc.megafon.ru
Register realm:multifon.ru
Register server: sip:7926xxxxxxx@sbc.megafon.ru:PASSWORD;transport=tcp
It provides registration on server but I'v got 403 Forbidden for outgoing calls.
Please, any ideas
Regards, sab
SIP provider's settings for multifon service
Re: SIP provider's settings for multifon service
Did you have any success?
Re: SIP provider's settings for multifon service
Do you have incoming calls working with this provider?sab wrote: It provides registration on server but I'v got 403 Forbidden for outgoing calls.
Re: SIP provider's settings for multifon service
Looks like something broken in SipSorcery/Multifon connection.
I try to check if something was changed, but for last three years it is broken.
My current setup:
Username: 792...
Server: sip:sbc.megafon.ru:5060
Realm: multifon.ru
Auth Username: 792... (Same as username).
It is able to register, but neither inbound, nor outbound calls passed. When I try to do inbound call from other phone, Megafon answers something like "Number doesn't exist".
Looks like this problem could be resolved only with server-side logs access.
It works from any other SIP client/service that I tested.
Maybe @AAron will take a look on it sometime? What info should I provide for it?
I try to check if something was changed, but for last three years it is broken.
My current setup:
Username: 792...
Server: sip:sbc.megafon.ru:5060
Realm: multifon.ru
Auth Username: 792... (Same as username).
It is able to register, but neither inbound, nor outbound calls passed. When I try to do inbound call from other phone, Megafon answers something like "Number doesn't exist".
Looks like this problem could be resolved only with server-side logs access.
It works from any other SIP client/service that I tested.
Maybe @AAron will take a look on it sometime? What info should I provide for it?
Re: SIP provider's settings for multifon service
You can obtain server side logs from the sipsorcery service by using the Console as described here http://www.sipsorcery.com/mainsite/Help/Console (note if you can't use the SIlverlight portal the Console is also available in the normal web login).
If you are trouble shooting a problem with a call the Console filter to use is: event full and request invite
Once set place your call and you will get a full SIP trace.
If you are getting an error message like "number doesn't exist" perhaps you are using the wrong prefix for international calls or something similar.
If you are trouble shooting a problem with a call the Console filter to use is: event full and request invite
Once set place your call and you will get a full SIP trace.
If you are getting an error message like "number doesn't exist" perhaps you are using the wrong prefix for international calls or something similar.