cannot dial out to GV

Getting started with the SIP Sorcery
Post Reply
lumangoy
Posts: 11
Joined: Wed Jun 23, 2010 9:12 pm

cannot dial out to GV

Post by lumangoy » Wed Oct 27, 2010 3:52 am

I can receive calls through my google voice number that I have forwarded to my gizmo account.

I cannot dialout, however.

I do not see anything in my sipsorcery console. I get a busy signal from my SPA-3102 after i dial the last number.

below is my syslog:

syslog server(port:514) started on Wed Oct 27 00:05:25 2010
[0]Off Hook
2. Report digit 1 (1)(40 ms)
2. Report digit 8 (1)(40 ms)
2. Report digit 0 (1)(40 ms)
2. Report digit 0 (1)(40 ms)
2. Report digit 2 (1)(40 ms)
2. Report digit 2 (1)(40 ms)
2. Report digit 5 (1)(40 ms)
2. Report digit 2 (1)(40 ms)
2. Report digit 5 (1)(40 ms)
2. Report digit 2 (1)(40 ms)
2. Report digit 5 (1)(40 ms)
Calling:18002252525@sipsorcery.com:0
[0:0]AUD ALLOC CALL (port=16424)
[0:0]RTP Rx Up
[0]->69.59.142.213:5060(1069)
[0]->69.59.142.213:5060(1069)
INVITE sip:18002252525@sipsorcery.com SIP/2.0

Via: SIP/2.0/UDP 192.168.0.3:5070;branch=z9hG4bK-805b6fae;rport

From: Anonymous <sip:anonymous@localhost>;tag=4d3335aa665674d9o0

To: <sip:18002252525@sipsorcery.com>

Remote-Party-ID: <sip:MYUSERNAME@sipsorcery.com>;screen=yes;privacy=full;party=calling

Call-ID: ef338ebe-1d91ced5@localhost

CSeq: 101 INVITE

Max-Forwards: 70

Contact: Anonymous <sip:anonymous@192.168.0.3:5070>

Expires: 240

User-Agent: MagicJack/2.0.562d (SJ Labs)

Content-Length: 436

Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER

Supported: x-sipura, replaces

Content-Type: application/sdp



v=0

o=- 3068 3068 IN IP4 192.168.0.3

s=-

c=IN IP4 192.168.0.3

t=0 0

m=audio 16424 RTP/AVP 0 2 4 8 18 96 97 98 100 101

a=rtpmap:0 PCMU/8000

a=rtpmap:2 G726-32/8000

a=rtpmap:4 G723/8000

a=rtpmap:8 PCMA/8000

a=rtpmap:18 G729a/8000

a=rtpmap:96 G726-40/8000

a=rtpmap:97 G726-24/8000

a=rtpmap:98 G726-16/8000

a=rtpmap:100 NSE/8000

a=fmtp:100 192-193

a=rtpmap:101 telephone-event/8000

a=fmtp:101 0-15

a=ptime:20

a=sendrecv



[0]<<69.59.142.213:5060(295)
[0]<<69.59.142.213:5060(295)
SIP/2.0 100 Trying

Via: SIP/2.0/UDP 192.168.0.3:5070;branch=z9hG4bK-805b6fae;rport=5070;received=my.external.ip

To: <sip:18002252525@sipsorcery.com>

From: "Anonymous" <sip:anonymous@localhost>;tag=4d3335aa665674d9o0

Call-ID: ef338ebe-1d91ced5@localhost

CSeq: 101 INVITE

Content-Length: 0





[0]<<69.59.142.213:5060(381)
[0]<<69.59.142.213:5060(381)
SIP/2.0 404 NotFound

Via: SIP/2.0/UDP 192.168.0.3:5070;branch=z9hG4bK-805b6fae;rport=5070;received=my.external.ip

To: <sip:18002252525@sipsorcery.com>

From: "Anonymous" <sip:anonymous@localhost>;tag=4d3335aa665674d9o0

Call-ID: ef338ebe-1d91ced5@localhost

CSeq: 101 INVITE

Content-Length: 0

Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER, REGISTER, SUBSCRIBE





[0]->69.59.142.213:5060(400)
[0]->69.59.142.213:5060(400)
ACK sip:18002252525@sipsorcery.com SIP/2.0

Via: SIP/2.0/UDP 192.168.0.3:5070;branch=z9hG4bK-805b6fae;rport

From: Anonymous <sip:anonymous@localhost>;tag=4d3335aa665674d9o0

To: <sip:18002252525@sipsorcery.com>

Call-ID: ef338ebe-1d91ced5@localhost

CSeq: 101 ACK

Max-Forwards: 70

Contact: Anonymous <sip:anonymous@192.168.0.3:5070>

User-Agent: MagicJack/2.0.562d (SJ Labs)

Content-Length: 0





[0]FM Alert Stop RxTx (c=0024e5e8;a=0)
[0:0]AUD Rel Call
CC:Failed w/ Calling
[0]On Hook
[0]->69.59.142.213:5060(4)
[0]->69.59.142.213:5060(4)
0000

Aaron
Site Admin
Posts: 4652
Joined: Thu Jul 12, 2007 12:13 am

Re: cannot dial out to GV

Post by Aaron » Wed Oct 27, 2010 4:58 am

You need to enter your credentials into your ATA/phone. The sipsorcery server isn't going to put your call through if it comes in as anonymous.

Code: Select all

From: Anonymous <sip:anonymous@localhost>;tag=4d3335aa665674d9o0

lumangoy
Posts: 11
Joined: Wed Jun 23, 2010 9:12 pm

Re: cannot dial out to GV

Post by lumangoy » Wed Oct 27, 2010 9:16 am

I've entered my credentials (under Proxy and Registration) so I don't know why it's sending it as anonymous.

do you know which section I need to change?

thanks.

MikeTelis
Posts: 1582
Joined: Wed Jul 30, 2008 6:48 am

Re: cannot dial out to GV

Post by MikeTelis » Wed Oct 27, 2010 9:46 am

First, make sure you enter it under "Line 1". Second, check if you're sending Line 1 calls thru default gateway (no specific gateway in Line1 dialplan).

lumangoy
Posts: 11
Joined: Wed Jun 23, 2010 9:12 pm

Re: cannot dial out to GV

Post by lumangoy » Wed Oct 27, 2010 12:11 pm

I've got it in line 1, and I don't have anything in the gateway.

my dial plan is:
(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)

MikeTelis
Posts: 1582
Joined: Wed Jul 30, 2008 6:48 am

Re: cannot dial out to GV

Post by MikeTelis » Wed Oct 27, 2010 1:41 pm

Subscriber information / Use auth ID -> no

lumangoy
Posts: 11
Joined: Wed Jun 23, 2010 9:12 pm

Re: cannot dial out to GV

Post by lumangoy » Wed Oct 27, 2010 8:52 pm

same thing

do I need to just reset the device?

MikeTelis
Posts: 1582
Joined: Wed Jul 30, 2008 6:48 am

Re: cannot dial out to GV

Post by MikeTelis » Wed Oct 27, 2010 9:02 pm

Probably the easiest way is to reset it to factory defaults and then reconfig for Sipsorcery.

lumangoy
Posts: 11
Joined: Wed Jun 23, 2010 9:12 pm

Re: cannot dial out to GV

Post by lumangoy » Wed Oct 27, 2010 10:43 pm

that worked and I had to fix my dial plan.

I've got it working now. thanks.

rpankoe
Posts: 5
Joined: Thu Jul 28, 2011 12:55 pm

Re: cannot dial out to GV

Post by rpankoe » Thu Jul 28, 2011 1:05 pm

What dial plan worked? I've got the same one in my SPA2102 and I can't make outbound calls. I receive calls OK after I put my WRVS4400N router that's in front to DMZ to this device, but every time I try to call out, I get 1 ring and then a busy tone. I've been banging my head on a wall trying to get this working and can't figure out what the problem is.

Post Reply