I need some help in setting up mediatrix 2102 with sipsorcer

Getting started with the SIP Sorcery
Post Reply
petargreat
Posts: 4
Joined: Fri Feb 25, 2011 3:58 pm

I need some help in setting up mediatrix 2102 with sipsorcer

Post by petargreat » Fri Feb 25, 2011 4:41 pm

This device comparing to other regular devices has too many things to setup properly in order to make it possible
to make and receive calls. I have set all things that should go in like soft-phone but I still cannot make nor receive calls.

I have set following settings:

SIP Server Source: Static
Registrar Host: sipsorcery.com
Registrar Port: 0
Proxy Host: sipsorcery.com
Proxy Port: 5060
Outbound Proxy Host: sipsorcery.com
Outbound Proxy Port: 5060
Presence Compositor Host: 0.0.0.0
Presence Compositor Port: 0


I will attach a few pictures in order to better express myself :)

any help highly appreciated!

thanks
petar
Attachments
media conf page 3.jpg
media conf page 3.jpg (135.13 KiB) Viewed 1785 times
media conf page 2.jpg
media conf page 2.jpg (114.68 KiB) Viewed 1785 times
mediatrix conf page.jpg
mediatrix conf page.jpg (156.17 KiB) Viewed 1785 times

Aaron
Site Admin
Posts: 4652
Joined: Thu Jul 12, 2007 12:13 am

Re: I need some help in setting up mediatrix 2102 with sipso

Post by Aaron » Fri Feb 25, 2011 10:38 pm

You'll probably need the Registrar port set to 5060.

petargreat
Posts: 4
Joined: Fri Feb 25, 2011 3:58 pm

Re: I need some help in setting up mediatrix 2102 with sipso

Post by petargreat » Sat Feb 26, 2011 8:32 am

I have just tried that and it does not work.

I have also experimented with different sip protocol versions, include or exclude (#) with username
and tried to switch my codec to g711a instead of g711u but nothing worked so far.

When i try to dial it accepts dial tone and on the spot where usualy sip session is established i start to hear error message from mediatrix some wierd tone
also in the same time if i try to call my self on any of the numbers associated with sipsorcery, my phone does not ring and i got behavior like there is no
device attached and registered to sipsorcery.

Very strange. I have tried counterpath xlite new (4), xlite old (3), sjphone for pocketpc over wcdma (3g) network an everything worked but mediatrix does not want :(

Mediatrix is behind the router wrt54gs on latest dd-wrt firmware in DMZ zone, so there would be no interference from the router on behavior of mediatrix.

Maybe somebody would read the post and point me in the right direction.

Thanks so far!
petar

petargreat
Posts: 4
Joined: Fri Feb 25, 2011 3:58 pm

Re: I need some help in setting up mediatrix 2102 with sipso

Post by petargreat » Sat Feb 26, 2011 9:17 am

SOLVED for now :)

I have not seen that on the picture 3 there should also go username instead of the number that i have entered.
After checking the log on sipsorcery i have found the error.

petar

Post Reply