TA612V problems
TA612V problems
I haven't used my voip phone for a few months, today I went to use it and it doesn't work ad I'm not sure what's changed.
This is the problem:-
I use sipgate to provide a free number, I use voipstunt to provide my outgoing calls.
When I dial a number from my ta612v connected phone I get the cleared line tone.
When I dial my sipgate number I get 'the number dialed has not been recognised'
I get a missed call log entry under sipgate Call list
Thanks in advance
This is the problem:-
I use sipgate to provide a free number, I use voipstunt to provide my outgoing calls.
When I dial a number from my ta612v connected phone I get the cleared line tone.
When I dial my sipgate number I get 'the number dialed has not been recognised'
I get a missed call log entry under sipgate Call list
Thanks in advance
Re: TA612V problems
these are the settings I have under sipsorcery:-
Sip accounts
Username xxxx
Domain sipsorcery.com
Password xxxx
Out Dial Plan out plan voipstunt
In Dial Plan
Keep Alives ticked
In Only
Disabled
Switchboard ticked
Network ID
IP Address ACL
Sip providers x2
Provider Name sipgate
Username xxxx
Password xxxxx
Server sip:sipgate.co.uk
Register
Register Contact sip:name@sipsorcery.com
Realm
Auth Username
From Header
Register Expiry 3600
Register Server
Provider Name voipstunt
Username xxxxx
Password xxxxx
Server sip:voipstunt.com
Register
Register Contact
Realm
Auth Username
From Header
Register Expiry 60
Register Server
Dial Plans
Name out plan voipstunt
Trace Address
Dial Plan Script sys.Dial("voipstunt")
Sip accounts
Username xxxx
Domain sipsorcery.com
Password xxxx
Out Dial Plan out plan voipstunt
In Dial Plan
Keep Alives ticked
In Only
Disabled
Switchboard ticked
Network ID
IP Address ACL
Sip providers x2
Provider Name sipgate
Username xxxx
Password xxxxx
Server sip:sipgate.co.uk
Register
Register Contact sip:name@sipsorcery.com
Realm
Auth Username
From Header
Register Expiry 3600
Register Server
Provider Name voipstunt
Username xxxxx
Password xxxxx
Server sip:voipstunt.com
Register
Register Contact
Realm
Auth Username
From Header
Register Expiry 60
Register Server
Dial Plans
Name out plan voipstunt
Trace Address
Dial Plan Script sys.Dial("voipstunt")
Re: TA612V problems
This is an outgoing call I think and was taken from the sipsorcery call history
2012-02-07T22:12:20.5126114+00:00 In sip:100000@sipsorcery.com:5060 0 "xxxx's House" <sip:xxxx@sipsorcery.com:5060>;tag=c0a83dfe-13c4-659-18cf04-b2 480 TemporarilyUnavailable 2012-02-07T22
2012-02-07T22:12:20.5126114+00:00 In sip:100000@sipsorcery.com:5060 0 "xxxx's House" <sip:xxxx@sipsorcery.com:5060>;tag=c0a83dfe-13c4-659-18cf04-b2 480 TemporarilyUnavailable 2012-02-07T22
Re: TA612V problems
Can you try logging onto the sipsorcery Silverlight portal at http://www.sipsorcery.com/mainsite/Home/Portal, click Connect on the console tab and then try placing a call from your ATA. If you get some messages flashing up in the console it means the call has reached the sipsorcery server.
Re: TA612V problems
Monitor 11:05:05:512: basetype=console, ipaddress=*, user=xxxx, event=*, request=*, serveripaddress=*, server=*, regex=.*.
NATKeepAlive 11:05:08:199 sip1(5856): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:82.13.44.58:10172.
NATKeepAlive 11:05:18:324 sip1(5856): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:82.13.44.58:10172.
NATKeepAlive 11:05:28:450 sip1(5856): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:82.13.44.58:10172.
NATKeepAlive 11:05:38:575 sip1(5856): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:82.13.44.58:10172.
DialPlan 11:05:39:997 sip1(3840): New call from udp:82.13.44.58:10172 successfully authenticated by digest.
DialPlan 11:05:39:997 sip1(3840): Using dialplan out plan voipstunt for Out call to sip:441727761431@sipsorcery.com:5060.
NewCall 11:05:40:012 sip1(3840): Executing script dial plan for call to 441727761431.
DialPlan 11:05:40:028 sip1(3840): Commencing Dial with: voipstunt.
DialPlan 11:05:40:028 sip1(3840): Attempting to locate a provider for call leg: sip:441727761431@voipstunt.
DialPlan 11:05:40:028 sip1(3840): Provider voipstunt is read-only and cannot be used for calls. Upgrade to a Premium service to enable.
DialPlan 11:05:40:028 sip1(3840): The dial string did not result in any call legs.
DialPlan 11:05:40:028 sip1(3840): Dialplan cleanup for xxxxx.
DialPlan 11:05:40:403 sip1(3840): Dial plan execution completed without answering and with no last failure status.
DialPlan 11:05:40:403 sip1(3840): UAS call failed with a response status of 480.
Registrar 11:05:44:747 sip1(5856): Authentication required for xxxx@sipsorcery.com from udp:82.13.44.58:10172.
Registrar 11:05:44:966 sip1(5856): Binding update request for xxxxx@sipsorcery.com from udp:82.13.44.58:10172, expiry requested 1800s granted 1800s.
RegisterSuccess 11:05:44:997 sip1(5856): Registration successful for xxxx@sipsorcery.com from udp:82.13.44.58:10172, binding sip:xxxx@82.13.44.58:10172;expiry=1800.
Am I right in thinking this is my problem :- "Provider voipstunt is read-only and cannot be used for calls. Upgrade to a Premium service to enable." when did this change? Thanks in Advance
NATKeepAlive 11:05:08:199 sip1(5856): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:82.13.44.58:10172.
NATKeepAlive 11:05:18:324 sip1(5856): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:82.13.44.58:10172.
NATKeepAlive 11:05:28:450 sip1(5856): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:82.13.44.58:10172.
NATKeepAlive 11:05:38:575 sip1(5856): Requesting NAT keep-alive from proxy socket udp:69.59.142.213:5060 to udp:82.13.44.58:10172.
DialPlan 11:05:39:997 sip1(3840): New call from udp:82.13.44.58:10172 successfully authenticated by digest.
DialPlan 11:05:39:997 sip1(3840): Using dialplan out plan voipstunt for Out call to sip:441727761431@sipsorcery.com:5060.
NewCall 11:05:40:012 sip1(3840): Executing script dial plan for call to 441727761431.
DialPlan 11:05:40:028 sip1(3840): Commencing Dial with: voipstunt.
DialPlan 11:05:40:028 sip1(3840): Attempting to locate a provider for call leg: sip:441727761431@voipstunt.
DialPlan 11:05:40:028 sip1(3840): Provider voipstunt is read-only and cannot be used for calls. Upgrade to a Premium service to enable.
DialPlan 11:05:40:028 sip1(3840): The dial string did not result in any call legs.
DialPlan 11:05:40:028 sip1(3840): Dialplan cleanup for xxxxx.
DialPlan 11:05:40:403 sip1(3840): Dial plan execution completed without answering and with no last failure status.
DialPlan 11:05:40:403 sip1(3840): UAS call failed with a response status of 480.
Registrar 11:05:44:747 sip1(5856): Authentication required for xxxx@sipsorcery.com from udp:82.13.44.58:10172.
Registrar 11:05:44:966 sip1(5856): Binding update request for xxxxx@sipsorcery.com from udp:82.13.44.58:10172, expiry requested 1800s granted 1800s.
RegisterSuccess 11:05:44:997 sip1(5856): Registration successful for xxxx@sipsorcery.com from udp:82.13.44.58:10172, binding sip:xxxx@82.13.44.58:10172;expiry=1800.
Am I right in thinking this is my problem :- "Provider voipstunt is read-only and cannot be used for calls. Upgrade to a Premium service to enable." when did this change? Thanks in Advance
Re: TA612V problems
Yes that's your problem. The sipsorcery service switched to paid accounts 6 months ago http://sipsorcery.wordpress.com/2011/04 ... p-sorcery/.
Re: TA612V problems
Hi Aaron,
I thought existing free users would still be ok?
I tried deleting my voipstunt provider in order to recreate it as I noticed the password was out of sync and it would let me update and now it won'tlet me create it.
I thought existing free users would still be ok?
I tried deleting my voipstunt provider in order to recreate it as I noticed the password was out of sync and it would let me update and now it won'tlet me create it.
Re: TA612V problems
You are entitled to one provider on the free plan. If you want to use your voipstunt provider you'll need to first delete your sipgate one.
Re: TA612V problems
thanks aaron, I reached the same conclusion just before checking back here. As you can probably tell I am a very lght user so the $35 yearly is not going to be worth it for me at the moment.
The brain is a little fuzzy and I'm trying to remember how/why I set it up with two providers, voipstunt for outgoing calls and sipgate for incoming perhaps. Is there any way being limited to one provider I can achieve the same goal?
Thanks again
The brain is a little fuzzy and I'm trying to remember how/why I set it up with two providers, voipstunt for outgoing calls and sipgate for incoming perhaps. Is there any way being limited to one provider I can achieve the same goal?
Thanks again
Re: TA612V problems
ok I've now managed to get my sipgate working so at least I can receive incomming calls from my sipgate number. For those that get stuck you need to tick register on the provider now