I have a Cisco SPA504G with two GV numbers, one was using Simonics and SipSorcery (SS) on another. A few days ago both numbers stopped working. I quit using Simonics as I was not sure it was still usable and after much work I've have both numbers working with SS for outgoing calls but not incoming. I am using IPComms for callback (?). Here is what I have from the SS site:
1 dialplans successfully loaded.
1 providers successfully loaded.
0 SIP registrar bindings are registered.
Dial plan:
when /^00/ then sys.Dial("cheapintlcalls")
else sys.Dial("G's GV")
end
Console:
Monitor 14:58:51:306: basetype=console, ipaddress=*, user=ben_reyes, event=*, request=*, serveripaddress=*, server=*, regex=.*.
Any help with this will be much appreciated.
0 SIP registrar bindings are registered.
Re: 0 SIP registrar bindings are registered.
Sounds like your SPA is not able to register with the sipsorcery server. Has it ever been able to register in the past?
First thing to do would be to double check you have the correct username and password and after that if it's still not working try replacing the server field of sipsorcery.com with 67.222.131.147 to rule out and possible DNS failures.
First thing to do would be to double check you have the correct username and password and after that if it's still not working try replacing the server field of sipsorcery.com with 67.222.131.147 to rule out and possible DNS failures.
Re: 0 SIP registrar bindings are registered.
Aaron, Thanks for getting back to me. First, I have checked user and password and they are correct. Second, I have never been able to connect with sipsorcery. I have used Mike Telis' simple dial plan for Google Voice. Worked on this last night and no success.Aaron wrote:Sounds like your SPA is not able to register with the sipsorcery server. Has it ever been able to register in the past?
First thing to do would be to double check you have the correct username and password and after that if it's still not working try replacing the server field of sipsorcery.com with 67.222.131.147 to rule out and possible DNS failures.
One more thing, I do not know where to put the IP address you suggested.
Update: Got it working but I'm not sure what I did; just did everything all over again following instructions on the site.
Re: 0 SIP registrar bindings are registered.
Glad to hear it's all working.