ss via pbxes not working

Support zone
Post Reply
beaver
Posts: 241
Joined: Tue Feb 09, 2010 5:32 am
Location: Beaverton USA (PST, GMT - 8)

ss via pbxes not working

Post by beaver » Thu Nov 26, 2015 7:45 pm

Aaron,

FYI,
Pbxes might have blocked sipsorcery.

My inbound calls using ss are not working since Nov. 22 2015. For the sake, outbound using ss also not working any more.

I have five trunks set in pbxes. ss is one of five and only one not working since Nov. 22 2015. Others (F9, sip2sip, cc, , ,) are still working well in pbxes.
I did by-pass pbxes and tested my ss setting. It woks fine. This just proven pbxes is the problem. Pbxes wouldn’t offer any supports.

My ss inbound path: gv-->ss-->pbxes.
The path by-pass pbxes: gv-->ss. this path works. but this setting often meets NAT issues(no ringing, one-way voice). I seldom use it. One solution was to add pbxes.

I am still trying to figure it out. Did search dsl VOIP forum and your ss forum. If you have any suggestions, please let me know.


Happy Thanksgiving!

Aaron
Site Admin
Posts: 4652
Joined: Thu Jul 12, 2007 12:13 am

Re: ss via pbxes not working

Post by Aaron » Mon Nov 30, 2015 9:27 am

I'm still able to register my pbxes.org account from sipsorcery so it doesn't look like the sipsorcery IP address is blocked.

I was also able to get a response on an outbound call from sipsorcery to pbxes so that path is not blocked either. Note I wasn't able to get the outbound call to connect but that could possibly be because my pbxes configuration is wrong.

beaver
Posts: 241
Joined: Tue Feb 09, 2010 5:32 am
Location: Beaverton USA (PST, GMT - 8)

Re: ss via pbxes not working

Post by beaver » Tue Dec 01, 2015 7:45 pm

my pbxes is up.
I didn't change any thing but toggled submit and reconfirm. pbxes refresh rate seems 3600 sec. toggling off/on sipsorcery registration needs reconfirming an hour later. That could be my mistake last time. This time I did toggle off then a day later turned the registration on.

Thanks Aaron for your reply,

Post Reply