Aaron,
FYI,
Pbxes might have blocked sipsorcery.
My inbound calls using ss are not working since Nov. 22 2015. For the sake, outbound using ss also not working any more.
I have five trunks set in pbxes. ss is one of five and only one not working since Nov. 22 2015. Others (F9, sip2sip, cc, , ,) are still working well in pbxes.
I did by-pass pbxes and tested my ss setting. It woks fine. This just proven pbxes is the problem. Pbxes wouldn’t offer any supports.
My ss inbound path: gv-->ss-->pbxes.
The path by-pass pbxes: gv-->ss. this path works. but this setting often meets NAT issues(no ringing, one-way voice). I seldom use it. One solution was to add pbxes.
I am still trying to figure it out. Did search dsl VOIP forum and your ss forum. If you have any suggestions, please let me know.
Happy Thanksgiving!
ss via pbxes not working
Re: ss via pbxes not working
I'm still able to register my pbxes.org account from sipsorcery so it doesn't look like the sipsorcery IP address is blocked.
I was also able to get a response on an outbound call from sipsorcery to pbxes so that path is not blocked either. Note I wasn't able to get the outbound call to connect but that could possibly be because my pbxes configuration is wrong.
I was also able to get a response on an outbound call from sipsorcery to pbxes so that path is not blocked either. Note I wasn't able to get the outbound call to connect but that could possibly be because my pbxes configuration is wrong.
Re: ss via pbxes not working
my pbxes is up.
I didn't change any thing but toggled submit and reconfirm. pbxes refresh rate seems 3600 sec. toggling off/on sipsorcery registration needs reconfirming an hour later. That could be my mistake last time. This time I did toggle off then a day later turned the registration on.
Thanks Aaron for your reply,
I didn't change any thing but toggled submit and reconfirm. pbxes refresh rate seems 3600 sec. toggling off/on sipsorcery registration needs reconfirming an hour later. That could be my mistake last time. This time I did toggle off then a day later turned the registration on.
Thanks Aaron for your reply,